OBD1 type Car Security System Canbus Car Alarm for Nissan Qashqai March Xtrail
Product technical data:
Master
a). Operating Voltage: 9V ~ 16V
b). Rated operational voltage: 12V
c). Standby current: 20~25MA
d). Standby frequency: 300MW
e). Working temperature:-20 ~80°C
Pulsator
a). Operating Voltage: 9V ~ 16V
b). Rated operational voltage: 12V
c). Standby current: 3 ~ 5MA
d). Rated operational current: 10MA
Function descriptions:
For Nissan Qashqai March Xtrail car alarm, canbus car alarm
1. Speed Lock: When the speed reaches 15KM/H, the central lock will lock automatically. If any door is opened during driving, the doors will relock when driving again. Turn off the ignition after driving, the doors will unlock.
2. Door Open Alert: When any of the doors is opened during driving, the turn signal lights will flash to remind the drivers driving behind to enhance the safety of roadside packing.
3. Disarming: Press the Unlock button on the original Remote Control once, the car horn will chirp twice (The factory setting is with sound confirmation when unlocking, sound or silent mode is programmable), the turn signal lights will flash twice.
4. Arming: Press the Lock button on the original Remote Control, the car horn will chirp once, the turn signal lights will flash once and the system will enter into armed state.
5. Door Triggered Alarm: 3 seconds after the alarm is armed, if any of the doors is opened, the car horn will chirp 6 times and the turn signal lights will flash at the same time.
6. Vibration Alarm: 30 seconds after the alarm is armed, if the car is triggered by vibration, the car horn will chirp 6 times and the turn signal lights will flash at the same time.
7. Auto Arming: 30 seconds after turning off the engine and closing all the doors, the car horn will chirp once indicating the system enters into auto arming countdown. After 60 seconds the system will arm automatically and the doors will lock.
(Note: The factory setting is auto arming ON with door locking. Please DO NOT leave the original remote control in the car to avoid it being locked in the car.)
Installation:
Only one siren wire need to connect with car original sirent.
